Phase Sequence And Failure Relay

Phase Sequence And Failure Relay

This relay monitors phase reversal, phase failure and voltage reduction. The output relay is normally energised when phases are correct. The relay will release when the phase sequence is wrong or a phase is lost, assuming that the re-injected voltage through the machine is not higher than 60% of normal voltage. The relay is delayed on break to avoid very short interruptions or other momentary failure. When used with auxiliary supply from one phase and neutral, the neutral is monitored.

  • For use on 3-phase supplies of 220, 380, 400, 415 and 440V AC.
  • Monitors phase sequence and failure of any phase.
  • Measures on voltage.
  • LED indicator for relay.
  • Output relay SPCO 10A.
To order any the products below enter the quantities required in the appropriate box or boxes. You can also use the up and down arrows to increment the quantities. If you wish to add any of the products to your favourites tick the boxes to the right. When you have selected all required products click the 'Add to Basket/Favourites' button.